Installing from ISO

Install SAS Radius on your own server from the SAS Radius ISO image. The same ISO can be installed in two ways:
Virtual machine: on Proxmox, VMware (ESXi / Workstation), VirtualBox or another hypervisor.
Bare metal: directly on a physical server, from a USB drive.
Download the ISO: https://dl.snono.systems/files/sasradius.iso
Option 1: Virtual machine (Proxmox, VMware, VirtualBox)
Upload the ISO to your hypervisor (for example Proxmox: local → ISO Images → Upload).
Create a new virtual machine:
Guest OS: Linux, Ubuntu 64-bit.
Firmware: BIOS / Legacy (not UEFI). Proxmox: SeaBIOS; VMware: BIOS; VirtualBox: leave Enable EFI unticked.
CPU, RAM and disk as in System Requirements.
Network: a bridged network adapter, so your routers can reach the server directly.
Attach the SAS Radius ISO as the CD/DVD drive.
Start the virtual machine and choose Install SAS RADIUS.
The installation runs automatically. The machine reboots twice; when the login prompt appears, the installation is finished.
Remove the ISO from the virtual CD/DVD drive.
Option 2: Bare metal (physical server from USB)
Write the ISO to a USB drive with a tool such as Rufus or balenaEtcher, or on Linux: 
dd if=sasradius.iso of=/dev/sdX bs=4M (sdX = your USB drive).
In the server BIOS, disable UEFI boot (use Legacy/BIOS boot mode).
Boot from the USB drive and choose Install SAS RADIUS.
The installation runs automatically. The server reboots twice; when the login prompt appears, the installation is finished.
Remove the USB drive.
Continue with First Setup After Installation.